Jyen is Chief Operating Officer at botouseneco (Hebei Senzhijia), with more than five years in indoor air quality chemistry and global B2B operations. Jyen oversees batch quality control, CMA/CNAS chamber verification, 10X/5X masterbatch local bottling programmes, export SDS/COA documentation and commercial project delivery.
Expertise
B2B supply chain and global export compliance.
10X and 5X concentrate dilution and local bottling SOPs.
ISO 9001/14001 batch quality control and CMA/CNAS testing.
OEM and private-label packaging programmes.
Commercial IAQ project bidding and handover standards.
HVLP atomization and thermal steam extraction equipment.
Credentials
Chief Operating Officer · Global B2B operations & QC desk. · 5+ years in indoor air quality chemistry and B2B operations.
Step-by-step B2B IAQ contractor bidding guide using 2.4x to 3.1x unfolded surface-area multipliers instead of floor area to calculate exact liter quotas, crew hours, and gross margins.
OEM private-label packaging guide for Amazon FBA and retail ClO2 gels and activated carbon pouches using 1.0 mm foil induction seals, ultrasonic SMS liners, and ISTA 3A drop-test compliance.
Post-harvest engineering guide to sizing 8% to 12% KMnO4 activated alumina scrubbers and ethylene sachets for 40-foot reefer containers and fruit cold rooms.
Preventive conservation guide to abating acetic acid, formic acid, and formaldehyde in museum vitrines and rare book vaults using amino carbon and KMnO4 media.
Engineering guide to data center ISA-71.04-2013 G1 corrosion control using 12% KMnO4 activated alumina and amino carbon V-banks to scrub H2S, SO2, and Cl2.
Head-to-head engineering comparison of GB 50325-2020 Class I civil building acceptance (<= 0.07 mg/m3 HCHO after 1-hour closure) versus GB/T 18883-2022 occupancy standards (<= 0.08 mg/m3 after 12-hour closure) and how contractors dose 1.4x higher to pass both.
Step-by-step B2B contractor tutorial on estimating bulk 25 L drum consumption and crew labor for 100+ unit multi-family and serviced apartment IAQ handovers using the 2.4x to 2.8x treatable surface-to-floor area multiplier.
Step-by-step overnight (10:00 PM to 10:00 AM) retail fit-out IAQ guide to neutralizing methyl methacrylate (MMA), cyclohexanone vinyl-graphic solvents, and PU lacquer BTEX/HCHO using TVOC Eliminator and Dual Essence with zero gloss hazing.
Step-by-step technical buyer's guide to auditing CMA and CNAS 1 m3 climate chamber test reports under ISO 16000-9 and GB/T 18883-2022, including blank-decay deduction math and 24-hour thermal desorption checks.
Step-by-step B2B import and customs clearance guide for shipping Non-Dangerous Goods (Non-DG) indoor air cleaners under HS Code 3824.99.9990 from Tianjin Port using 16-section GHS Rev. 10 SDS files.
Step-by-step contractor hardware guide comparing 0.5 mm, 0.8 mm, and 1.3 mm HVLP spray nozzles at 0.20 to 0.25 MPa air pressure to achieve 5 to 30 um droplet Sauter mean diameter (SMD) with zero wall drips.
Step-by-step B2B bottling tutorial for diluting 10X Amino-Acid HCHO Scavenger Masterbatch at 1:9 with <=10 uS/cm reverse-osmosis (RO) water to cut ocean freight by 85% and keep 24-month shelf stability.
Data-driven engineering study on 3 to 5 mm gamma-Al2O3 spheres impregnated with 8% to 12% potassium permanganate (KMnO4) for irreversible formaldehyde, H2S, and SO2 oxidation in HVAC V-banks and HEPA cartridges.
Field engineering guide to spraying 5 to 10 nm visible-light Nano Photocatalyst Spray at 8 to 12 ml/m2 using a 0.5 mm HVLP gun at 0.25 MPa to achieve optically clear film uniformity without white chalking.
Engineering guide to large-floorplate commercial office TVOC remediation using 25 L bulk drums of Total VOC Eliminator at 15 to 25 ml/m2 to pass LEED v4.1 EQ Credit and GB/T 18883-2022 Tenax-TA GC-MS handovers.
Engineering analysis of Stage 1 thermal steam fumigation kinetics (60 to 95 C) using High-Temperature Formaldehyde HCHO Fumigation Solution at 20 to 30 ml/m2 to flush and capture 3 to 6 months of shallow formaldehyde.
Field guide on why opening windows fails against bound wood glue, and how B2B crews use a 3-stage spray plan to pass ISO 16000 and GB/T 18883 air tests.
Jyen
Factory-direct supply
Questions for Jyen?
Send your project details and Jyen will reply with recommendations and documents.