Request a quote

TVOC & Photocatalyst

TVOC Eliminator

Broad-Spectrum VOC Neutralizer

botouseneco TVOC Eliminator is a commercial broad-spectrum volatile organic compound neutralizer formulated for newly painted walls, acoustic panels, commercial carpeting, and synthetic interior finishes. Applied via 0.5mm–0.8mm HVLP atomization at 10–20 ml/m², it chelates and degrades mixed organic solvents to bring indoor air below the ≤0.60 mg/m³ TVOC acceptance threshold.

  • Total Volatile Organic Compounds (TVOC)
  • Alkanes, Esters & Ketones
  • Paint & Carpet Solvents
Dosage
10 – 20 ml/m² depending on coating thickness and baseline TVOC reading
Method
Fine HVLP / ULV mist atomization (0.5mm–0.8mm nozzle) across large surface zones
Pack formats
1L Bottles, 5L Jerrycans, 20L / 25L Pails, 200L Bulk Drums

Last updated

Multi-Class VOC Targeting
Multi-VOC Spectrum
Non-Staining Wall Safe Formula
Zero Wall Staining
Rapid 48-Hour Knockdown
≤ 0.60 mg/m³ Target
ULV & HVLP Equipment Ready
0.5–0.8mm Nozzle

01Overview

What TVOC Eliminator does.

Targeted abatement for post-renovation spaces where third-party air testing reveals elevated Total Volatile Organic Compounds (TVOC).

Even when low-formaldehyde E0/ENF boards are used, newly fitted offices, hotels, and residences frequently fail indoor air quality inspections due to high TVOC emissions from latex wall paints, PVC wall coverings, silicone sealants, and synthetic carpets. botouseneco TVOC Eliminator combines plant-derived terpene chelators with micro-catalytic oxidizers that capture and cleave volatile organic chains on contact.

Multi-VOC Spectrum

Multi-Class VOC Targeting

Simultaneously addresses non-polar alkanes, esters, ketones, and residual monomer solvents from decorative finishes.

Zero Wall Staining

Non-Staining Wall Safe Formula

Engineered to dry crystal-clear on white latex paint, textured wallpaper, and acoustic fabric panels without yellowing.

≤ 0.60 mg/m³ Target

Rapid 48-Hour Knockdown

Accelerates solvent off-gassing decay curves so commercial properties pass third-party IAQ acceptance testing on schedule.

0.5–0.8mm Nozzle

ULV & HVLP Equipment Ready

Low-viscosity liquid atomizes cleanly through standard contractor spray systems without nozzle buildup.

Key attributes

Brand
botouseneco
Product line
TVOC & Photocatalytic Coatings
Technology
Broad-spectrum VOC neutralizer
Format
Liquid spray
Target pollutants
TVOC
Applications
Post-renovation · Commercial & HVAC · Hotel & hospitality
Coverage
10–20 ml/m²
Pack range
1 L – 200 L
Place of origin
Botou, Hebei, China
Private label
Label · bottle · scent · strength
Samples
Kit of 1–5 units, ships in 24–48 hours

Reaction mechanism

Amphiphilic VOC Capture & Catalytic Chain Cleavage

Many VOC species (aromatic esters, ketones, higher alkanes) are hydrophobic and resist standard water-based formaldehyde sprays. TVOC Eliminator employs an amphiphilic micellar carrier that solubilizes non-polar VOC molecules at the substrate interface, enabling catalytic degradation into harmless water-soluble byproducts.

Reaction pathway

TVOC + Chelate/Cat → CO₂ + H₂O
Active chemistry
Amphiphilic micellar capture + catalytic organic oxidation
Class
Broad-Spectrum TVOC Abatement

02Technical data

Technical Specifications

Published factory QC parameters for engineering submittals, tenders and procurement files, grouped the way distributors list them.

Need the signed documents?

English TDS, GHS-format SDS and a batch COA for TVOC Eliminator.

Request documents
Identity & composition
Active ChemistryAmphiphilic plant-extract chelators, micro-catalytic oxidizers, deionized carrier
Physical & formulation properties
Appearance & pHClear liquid; pH 6.5 – 7.5
GradeCommercial & Architectural Broad-Spectrum TVOC Abatement Grade
CAS number(s)7732-18-5 (Deionized Water) · Amphiphilic Plant-Extract Chelators & Micro-Catalytic Oxidizers (per SDS Section 3)
OdorOdorless (Fragrance-free)
Density1.01 - 1.03 g/cm³ (20 °C)
Viscosity1.2 - 2.5 mPa·s (25 °C, optimized for 0.5-0.8 mm HVLP)
Flash pointNon-flammable (Aqueous dispersion)
Solubility100% miscible in water
VOC content< 5 g/L (Ultra-low VOC aqueous carrier)
HS code3824.99.9990
Performance & targets
Target PollutantTotal Volatile Organic Compounds (TVOC), paint solvents, carpet & sealant emissions
Compliance BenchmarkSupports remediation toward GB/T 18883-2022 & commercial TVOC ≤ 0.60 mg/m³ limits
Application parameters
Recommended Dosage10 – 20 ml/m² across walls, ceilings, carpets, and soft furnishings
Storage & shelf life
Storage & Stability24 months in sealed HDPE containers at 5°C–35°C
TVOC Eliminator application

03Application

Large-Surface Wall & Textile Coverage Protocol

Treat high-surface-area finishes where solvent films off-gas.

Unlike formaldehyde (which concentrates in dense wood joints), TVOC off-gasses across expansive surface areas such as painted walls, ceilings, and carpeting. Maintain a 30–40 cm spray distance for uniform micro-mist deposition.

  1. 01

    Baseline Concentration & Climate Log

    Record initial HCHO/TVOC readings (mg/m³), room temperature (°C), relative humidity (% RH), and closure window (1h vs. 12h).

  2. 02

    Substrate & Resin Identification

    Identify whether off-gassing stems from urea-formaldehyde MDF/particleboard, phenolic plywood, solvent lacquers, or textile backings.

  3. 03

    Atomization & Dosage Calculation

    Calculate total surface area (m²) of panels, walls, and ceilings to determine exact liquid volume (ml/m²) and nozzle gauge (0.5mm–1.0mm).

  4. 04

    B2B Packaging & Sample Validation

    Confirm sample evaluation batch, TDS/MSDS export documentation, and commercial drum sizing (1L / 5L / 20L / 25L / 200L).

Suitable for

  • Latex-painted drywall
  • wallpaper
  • PVC flooring
  • commercial carpets
  • acoustic panels

Use cases Office fit-out TVOC compliance (≤0.60 mg/m³), hotel room turnaround, residential handover

Before you apply

Non-staining on matte and eggshell latex wall paint; avoid heavy dripping

Method Fine HVLP / ULV mist atomization (0.5mm–0.8mm nozzle) across large surface zones

04Safety, handling & compliance

Handle, store and ship with confidence.

Hazard classification, storage and transport data follow the product's safety data sheet. Request the SDS for the full 16-section document.

Hazard communication (GHS)

Signal word
Not classified (Non-hazardous formulation)
Pictograms
Not classified as hazardous under GHS Rev. 10
Hazard statements
H303: May be harmful if swallowed in concentrated undiluted volume (Category 5). · Free of flammable solvents, heavy metals, chlorine bleach, and secondary VOCs.
Precautionary statements
P262: Avoid direct spray mist contact with eyes. · P280: Wear nitrile gloves and fine-mist respirator during overhead HVLP spraying. · P305+P351+P338: If in eyes, rinse cautiously with clean water for several minutes.
Request the SDS

Handling

Non-staining on matte and eggshell latex wall paint; avoid heavy dripping

Protective equipment: Nitrile gloves, safety glasses, and FFP2/N95 mist mask during enclosed HVLP atomization.

Storage & shelf life

Shelf life
24 months in unopened original HDPE container.
Storage
Store at 5 °C - 35 °C in a cool, dry, ventilated warehouse away from direct sunlight and freezing.

Transport

Non-Dangerous Goods (Non-DG) for sea, air, and road freight (Not regulated under IMDG, IATA, or ADR).

Certifications

  • ISO 9001:2015 Quality Management System
  • ISO 14001:2015 Environmental Management
  • CMA / CNAS Accredited Chamber Verification
  • GHS Rev. 10 / ISO 11014 16-Section SDS Compliant

Certificate copies and full test reports are shared with buyers on request. Request copies · Quality & certifications

Regulatory status

  • GB/T 18883-2022 Indoor Air Quality Standard Compliant
  • US EPA TSCA Title VI & CARB Phase 2 Compatible
  • EU REACH SVHC-Free Formulation
  • Non-DG Sea/Air Export Certified
Third-party test reports
TestStandardLaboratoryResult
24h Closed-Chamber Pollutant AbatementISO 16000-6 / GB/T 18883-2022 1 m³ Chamber TVOC AbatementCMA/CNAS Accredited Environmental Lab & botouseneco QC CenterRapid 24–48h multi-class TVOC knockdown below ≤ 0.60 mg/m³ commercial threshold
Substrate Corrosion, pH Neutrality & Zero-Stain VerificationGB/T 18883 Annex & ISO 2409 Surface Integrity Protocolbotouseneco Botou R&D Lab (Supervised by Jyen)Pass (pH 6.5-7.5; 0% yellowing, blistering, or hardware corrosion)
botouseneco TVOC Eliminator – B2B Supply Formats & Packaging Sizes

05Ordering & logistics

Formats, terms & private label.

  • 1L Bottles
  • 5L Jerrycans
  • 20L / 25L Pails
  • 200L Bulk Drums
Minimum order
Sample evaluation kit (1-5 units); Bulk wholesale from 100 L / 4 drums; OEM private label from 500-1,000 units.
Lead time
Samples: 24-48 hours; Standard bulk drums: 5-7 business days; Custom OEM packaging: 10-14 business days.
Samples
Kit of 1–5 units, ships in 24–48 hours · 500 mL / 1 L liquid evaluation bottle or 200 g media sample pack.
Units per carton
20 x 500 mL / 12 x 1 L bottles per export carton; 20 L / 25 L individual HDPE pails.
Pallet
24-36 pails (20 L/25 L) per CP1 export pallet, or 4 x 200 L drums / 1 x 1,000 L IBC tote per pallet.
Private label
Your artwork, bottle or jar format, active concentration and scent profile
Trade terms
EXW Botou · FOB Tianjin · CIF / CFR Global Port
Port of loading
Tianjin Port (Xingang), China (~180 km from Botou factory)

Pack formats to scale

Pack formats: 1 L, 5 L, 20 / 25 L, 200 L1 Lbottle5 Ljerrycan20 / 25 Lpail200 Ldrum1,000 LIBC tote
Highlighted: the standard formats for TVOC Eliminator. Containers drawn to scale by volume (height ∝ ∛volume).

06Documents

Technical & safety documents.

Every shipment travels with these documents. Download them here when available, or request the current version from our engineers.

  • TDS
    Encrypted Technical Data Sheet & Specification (Read-Only PDF)TVOC Eliminator · English · v2026.4 (AES-Protected)
    Download PDF
  • SDS
    Safety Data Sheet (16-Section GHS Rev. 10 Format)TVOC Eliminator · English · v2026.4
    Request
  • COA
    Batch Certificate of Analysis (Lot-Numbered QC Report)TVOC Eliminator · English · vPer Batch
    Request

07Dosage

Estimate the quantity for your project.

Based on the published coverage for TVOC Eliminator: 10 – 20 ml/m² depending on coating thickness and baseline TVOC reading.

Published coverage: 10 – 20 ml/m² depending on coating thickness and baseline TVOC reading

Application passes

Use 2–3 passes for raw high-density board or heavy TVOC loads.

Estimated quantity

3.0–6.0L

10–20 ml/m² × 300 m² × 1 pass

Suggested packs2 × 5 L jerrycans
Quote this quantity

Estimate from the published coverage range. Real consumption depends on substrate porosity, nozzle size and baseline readings — our engineers confirm it with your quote.

08Questions

About TVOC Eliminator, answered.

01What is the difference between TVOC Eliminator and Formaldehyde Remover?

Formaldehyde Remover is specialized for water-soluble HCHO emitted by urea-formaldehyde wood resins. TVOC Eliminator uses amphiphilic chelators to capture hydrophobic organic solvents (alkanes, esters, ketones, aromatic hydrocarbons) emitted by wall paints, carpets, and sealants.

02Can TVOC Eliminator be sprayed directly onto commercial office carpets and curtains?

Yes. TVOC Eliminator is non-bleaching and pH-neutral, making it safe for synthetic commercial carpets, fabric office partitions, and draperies after a standard spot check.

Engineering journal

Field protocols & guides using TVOC Eliminator.

Step-by-step dosing schedules, chamber test datasets and substrate compatibility guides written by our Botou formulation and QC team.

All 66 engineering guides

Factory-direct supply

Evaluate TVOC Eliminator on your substrates.

Request a sample with the English TDS and SDS, or send your project size for a bulk or private-label quotation of TVOC Eliminator.