Neutralizes Tannery Aldehydes
Targets both free formaldehyde and glutaraldehyde retained from leather syntan retanning processes.
01 / 05 · Studio PackshotLuxury Leather & Upholstery VOC Conditioning Cream
Tannery Odor & Aldehyde Conditioning Balm
botouseneco Luxury Leather & Upholstery VOC Conditioning Cream is a cosmetic-grade B2B leather balm that simultaneously neutralizes residual tanning aldehydes (HCHO, glutaraldehyde), DMF/toluene finish solvents, and pungent hide odors while nourishing top-grain leather sofas, executive seating, and luxury car interiors. Applied at 8–12 g/m², it dries to a supple, non-greasy matte finish.
- Leather Tannery Aldehydes (Formaldehyde / Glutaraldehyde)
- PU Coating Benzene, Toluene & DMF Solvents
- Pungent New-Leather & Hide Malodors
- Dosage
- 8 – 12 g/m² (one 300g jar treats 25–35 m² of leather upholstery)
- Method
- Apply thin layer with microfiber applicator pad, allow 10 min absorption, buff dry
- Pack formats
- 300g Wide-Mouth Jars (with applicator pad), 1kg / 5kg Contractor Tubs
Last updated
- Neutralizes Tannery Aldehydes
- HCHO + Glutaraldehyde
- Removes Pungent Hide & DMF Odor
- DMF & Odor Lock
- pH 5.2 Collagen-Balanced
- pH 5.0–5.5
- Silicone-Free Satin Matte
- Zero Silicone Glaze
01Overview
What Leather VOC Conditioning Cream does.
Safe, nourishing VOC and odor abatement for high-value leather sofas, hospitality seating, and executive suites.
New leather sofas, upholstered bed frames, and executive office chairs are major sources of indoor aldehydes and pungent chemical odors due to syntan/aldehyde tanning agents and polyurethane/nitrocellulose topcoats dissolved in dimethylformamide (DMF) and toluene. Spraying water-based sprays directly onto fine aniline or Nappa leather can strip natural oils and leave water rings. botouseneco Luxury Leather & Upholstery VOC Conditioning Cream solves this with an oil-in-water lanolin and jojoba micro-emulsion enriched with lipophilic aldehyde scavengers and cyclodextrin odor traps.
Removes Pungent Hide & DMF Odor
Eliminates the sharp chemical smell of new leather sofas and PU-coated upholstery within 24 hours.
pH 5.2 Collagen-Balanced
Matches the natural acidic pH of genuine leather to prevent cracking, fading, or surface tackiness.
Silicone-Free Satin Matte
Leaves leather supple and breathable with its original factory matte sheen—never slick or greasy.
Key attributes
- Brand
- botouseneco
- Product line
- Surface Care & Functional Wax
- Technology
- Leather conditioning balm
- Format
- Wax & cream
- Target pollutants
- Formaldehyde · Benzene / BTEX · Odor & ammonia
- Applications
- Automotive · Hotel & hospitality
- Coverage
- 8–12 g/m²
- Pack range
- 300 g – 5 kg
- Place of origin
- Botou, Hebei, China
- Private label
- Label · bottle · scent · strength
- Samples
- Kit of 1–5 units, ships in 24–48 hours
Reaction mechanism
Lipophilic Dermis Penetration & Tanning-Aldehyde Cross-Linking
Natural lanolin and jojoba esters carry active amine-functionalized scavengers and cyclodextrin inclusion complexes gently into the leather's microscopic collagen pores—binding free formaldehyde and glutaraldehyde while encapsulating volatile DMF and aromatic finish solvents without clogging leather breathability.
Reaction pathway
Lanolin/Jojoba Emulsion + BTEX/Aldehyde Trap- Active chemistry
- Lanolin/jojoba nourishment + lipophilic aldehyde & DMF scavenging
- Class
- Leather VOC & Tannery Odor Balm
02Technical data
Technical Specifications
Published factory QC parameters for engineering submittals, tenders and procurement files, grouped the way distributors list them.
Need the signed documents?
English TDS, GHS-format SDS and a batch COA for Leather VOC Conditioning Cream.
Request documents| Active Components | Pharmaceutical lanolin, jojoba esters, lipophilic aldehyde scavenger, β-cyclodextrin |
|---|
| Physical Form & pH | Rich ivory conditioning cream / balm; leather-safe pH 5.0 – 5.5 |
|---|---|
| Grade | Fine Millwork, Veneer & Luxury Leather Preservation Grade |
| CAS number(s) | 8006-54-0 (Cosmetic Lanolin / Jojoba Esters) · Lipophilic Aldehyde Scavenger & β-Cyclodextrin Complex (per SDS Section 3) |
| Odor | Natural mild beeswax & botanical oil note |
| Density | 0.94 - 0.98 g/cm³ (20 °C) |
| Viscosity | 4,500 - 8,000 mPa·s (Thixotropic non-drip cream at 25 °C) |
| Flash point | > 95 °C (Closed cup, non-regulated) |
| Solubility | Emulsifiable dispersion (Water-free / low-moisture surface barrier) |
| VOC content | < 15 g/L (Zero aromatic solvents) |
| HS code | 3405.20.0000 |
| Target Pollutants | Formaldehyde, Glutaraldehyde, DMF (Dimethylformamide), Toluene, Tannery Odors |
|---|
| Recommended Dosage | 8 – 12 g/m² applied via microfiber sponge |
|---|
| Packaging Options | 300g retail/service jars, 1kg / 5kg B2B tubs |
|---|
03Application
Leather Finish Type & pH Balance Protocol
Isoelectric pH 5.2 formula protects collagen fibers against stiffening.
Unlike alkaline cleaners (pH >8) that embrittle leather, Luxury Leather & Upholstery VOC Conditioning Cream is buffered at pH 5.0–5.5. Wipe dust from leather seams and piping first, massage a thin coat into cushions and backrests, and buff to a natural satin-matte feel.
- 01
Baseline Concentration & Climate Log
Record initial HCHO/TVOC readings (mg/m³), room temperature (°C), relative humidity (% RH), and closure window (1h vs. 12h).
- 02
Substrate & Resin Identification
Identify whether off-gassing stems from urea-formaldehyde MDF/particleboard, phenolic plywood, solvent lacquers, or textile backings.
- 03
Atomization & Dosage Calculation
Calculate total surface area (m²) of panels, walls, and ceilings to determine exact liquid volume (ml/m²) and nozzle gauge (0.5mm–1.0mm).
- 04
B2B Packaging & Sample Validation
Confirm sample evaluation batch, TDS/MSDS export documentation, and commercial drum sizing (1L / 5L / 20L / 25L / 200L).
Suitable for
- Full-grain & top-grain leather sofas
- upholstered beds
- hotel lounge seating
- Nappa car seats
Before you apply
pH 5.0–5.5 balanced to match natural leather collagen; do not use on raw suede/nubuck
04Safety, handling & compliance
Handle, store and ship with confidence.
Hazard classification, storage and transport data follow the product's safety data sheet. Request the SDS for the full 16-section document.
Hazard communication (GHS)
- Signal word
- Not classified (Non-hazardous formulation)
- Pictograms
- Not classified as hazardous under GHS Rev. 10
- Hazard statements
- H303: May be harmful if swallowed in concentrated undiluted volume (Category 5). · Free of flammable solvents, heavy metals, chlorine bleach, and secondary VOCs.
- Precautionary statements
- P262: Avoid direct contact with eyes. · P280: Wear nitrile gloves during extended commercial buffing applications. · P305+P351+P338: If in eyes, rinse cautiously with clean water for several minutes.
Handling
pH 5.0–5.5 balanced to match natural leather collagen; do not use on raw suede/nubuck
Protective equipment: Nitrile gloves and microfiber applicator pad during manual buffing.
Storage & shelf life
- Shelf life
- 24 months in unopened original HDPE container.
- Storage
- Store at 5 °C - 35 °C in a cool, dry, ventilated warehouse away from direct sunlight and freezing.
Transport
Non-Dangerous Goods (Non-DG) for sea, air, and road freight (Not regulated under IMDG, IATA, or ADR).
Certifications
- ISO 9001:2015 Quality Management System
- ISO 14001:2015 Environmental Management
- CMA / CNAS Accredited Chamber Verification
- GHS Rev. 10 / ISO 11014 16-Section SDS Compliant
Certificate copies and full test reports are shared with buyers on request. Request copies · Quality & certifications
Regulatory status
- GB/T 18883-2022 Indoor Air Quality Standard Compliant
- US EPA TSCA Title VI & CARB Phase 2 Compatible
- EU REACH SVHC-Free Formulation
- Non-DG Sea/Air Export Certified
| Test | Standard | Laboratory | Result |
|---|---|---|---|
| 24h Closed-Chamber Pollutant Abatement | EN 717-1 Chamber Flux & ISO 2409 Surface Gloss Retention | CMA/CNAS Accredited Environmental Lab & botouseneco QC Center | 88.5% surface HCHO & aldehyde flux reduction with zero leather stiffening |
| Substrate Corrosion, pH Neutrality & Zero-Stain Verification | GB/T 18883 Annex & ISO 2409 Surface Integrity Protocol | botouseneco Botou R&D Lab (Supervised by Jyen) | Pass (pH 5.0-5.5 collagen-balanced; 0% yellowing, cracking, or silicone glaze) |
05Ordering & logistics
Formats, terms & private label.
- 300g Wide-Mouth Jars (with applicator pad)
- 1kg / 5kg Contractor Tubs
- Minimum order
- Sample evaluation kit (1-5 units); Bulk wholesale from 100 L / 4 drums; OEM private label from 500-1,000 units.
- Lead time
- Samples: 24-48 hours; Standard bulk drums: 5-7 business days; Custom OEM packaging: 10-14 business days.
- Samples
- Kit of 1–5 units, ships in 24–48 hours · 500 mL / 1 L liquid evaluation bottle or 200 g media sample pack.
- Units per carton
- 24 x 300 g wide-mouth jars per export carton; 1 kg / 5 kg contractor tubs.
- Pallet
- Export palletized cartons (300 g jars) or 1 kg / 5 kg bulk contractor tubs.
- Private label
- Your artwork, bottle or jar format, active concentration and scent profile
- Trade terms
- EXW Botou · FOB Tianjin · CIF / CFR Global Port
- Port of loading
- Tianjin Port (Xingang), China (~180 km from Botou factory)
06Documents
Technical & safety documents.
Every shipment travels with these documents. Download them here when available, or request the current version from our engineers.
- TDSEncrypted Technical Data Sheet & Specification (Read-Only PDF)Luxury Leather & Upholstery VOC Conditioning Cream · English · v2026.4 (AES-Protected)
- SDSSafety Data Sheet (16-Section GHS Rev. 10 Format)Luxury Leather & Upholstery VOC Conditioning Cream · English · v2026.4Request
- COABatch Certificate of Analysis (Lot-Numbered QC Report)Luxury Leather & Upholstery VOC Conditioning Cream · English · vPer BatchRequest
07Dosage
Estimate the quantity for your project.
Based on the published coverage for Leather VOC Conditioning Cream: 8 – 12 g/m² (one 300g jar treats 25–35 m² of leather upholstery).
Published coverage: 8 – 12 g/m² (one 300g jar treats 25–35 m² of leather upholstery)
Use 2–3 passes for raw high-density board or heavy TVOC loads.
Estimated quantity
2.4–3.6kg
8–12 g/m² × 300 m² × 1 pass
Suggested packs4 × 1 kg bottles
Quote this quantityEstimate from the published coverage range. Real consumption depends on substrate porosity, nozzle size and baseline readings — our engineers confirm it with your quote.
08Questions
About Leather VOC Conditioning Cream, answered.
01Can Luxury Leather & Upholstery VOC Conditioning Cream be used on perforated leather car seats and ventilated office chairs?
Yes. Spread the cream thinly onto the microfiber applicator pad first so it coats the leather surface evenly without plugging ventilation pinholes.
09Related
Often specified alongside.
Surface & Leather Care
Formaldehyde Removal Care Wax
Wood care barrier wax
- Dosage
- 10–15 g/m²
- Packs
- 500 g – 20 kg
Formaldehyde & Benzene
Formaldehyde & Benzene C6H6 Essence
Dual-phase micro-emulsion
- Dosage
- 12–20 ml/m²
- Packs
- 500 ml – 20 L
Formaldehyde & Benzene
High-Temperature HCHO Fumigation Solution
Thermal steam extraction fluid
- Dosage
- 20–30 ml/m²
- Packs
- 1 L – 200 L
Engineering journal
Field protocols & guides using Leather VOC Conditioning Cream.
Step-by-step dosing schedules, chamber test datasets and substrate compatibility guides written by our Botou formulation and QC team.
All 66 engineering guides
Perforated Cooled Automotive Nappa Seats and Microfiber Suede (Alcantara): Zone-Matched VOC Conditioning Without Blocking Airflow Holes
Zone-matched automotive interior VOC guide for perforated cooled Nappa leather seats and Alcantara suede trim at 8 to 12 g/m2 without plugging 1.0 mm fan holes.
Loo
Electric Vehicle (EV) Panoramic Glass Roof Cabin Bake: Abating Battery-Pack Adhesive, Acoustic Foam, and Vegan Leather Aldehydes
Step-by-step EV cabin air detox guide to abating acetaldehyde, acrolein, HCHO, DMF from vegan PU leather, and styrene from battery-floor adhesives and NVH foam under 68 C solar baking.
Loo
Removing Hexanal, Acetaldehyde, and DMF from Automotive Nappa Leather and Hotel Lounge Seating Without Drying the Hide
Step-by-step leather IAQ guide to neutralizing tannery glutaraldehyde, lipid-oxidation hexanal, and PU finish dimethylformamide (DMF) on automotive Nappa leather and hotel sofas at 8 to 12 g/m2 using pH 5.0 to 5.5 lanolin-jojoba conditioning cream.
Loo
Automotive Cabin Rapid Air Detox for 4S Dealerships and Detailing Chains: VDA 275/276 Aldehyde Abatement and 75 C Solar Heat Stability
Step-by-step 20-minute automotive cabin air detox guide for 4S dealerships and detailing chains using a 250 mL amino-cyclodextrin mist and 120 g 75 C heat-stable cup-holder gel to pass GB/T 27630 and VDA 275/276 checks.
Loo
Factory-direct supply
Evaluate Leather VOC Conditioning Cream on your substrates.
Request a sample with the English TDS and SDS, or send your project size for a bulk or private-label quotation of Leather VOC Conditioning Cream.